Today we offer to get acquainted with the main stages of installing a shower for a heated cottage. Consider what model options are on sale, also help to navigate in prices. After reading the article, you can easily understand this issue, which will greatly facilitate further choice.
Summer shower for giving heated - an important component of comfort on the land, the main feature is that it is used in cold and heat. On a warm summer day, you can swim without heating, saving electricity. The tank with shower water is in the sun and heats up in a natural way, and in cool weather, electric water heating is already connected.
A country house is set up on an open area so that the sun's rays can directly warm the bathing water. With equipment, it is necessary to provide for the availability of electricity, due to which the water will be heated to the desired temperature by the heating element.
A darker color tank is better suited to ensure heating water sunny summer. Tanks are of two types - plastic and metal. In terms of reliable temperature preservation and stronger heating, an iron tank is preferable. Metal, in addition to being heated more, also keeps heat longer, unlike plastic. Plastic has its advantages: a tank made of such material lighter and less load on the base of the cabin.
The main elements of a street shower for giving heated:
The base or foundation;
Drain and grape;
A shower stall, including a frame, a tank for water with an electric heater, a watering can with a ball valve, a tray, and a plating.
Consider step by step the steps of installing a street shower for a heated cottage:
1) First you need to decide on the size of booths and what volume of water is needed for washing in the tank. Most often, a height of just over 2 meters is convenient. The volume of water ranges from 60 to 250 liters.
2) Choose a place on the summer cottage, which would answer the following tips :
The platform should not be in a draft and wind in order to avoid a cold of a washing person;
Convenient drain leading to the country sewage system;
The sunniest and hot plot in the country to heat the water in the tank.
3) Next the ground is prepared and the drain is . Experts advise that the volume of the drainage pit is 2.5 times larger than that of a water tank. As a simple option, you can simply lay an inclined pipe from the booth. A septic tank and drainage are installed next to the drain.
4) Installation of the pallet in a small dug recess, previously covered with tar paper and covered with gravel on top.
5) Next the frame is put, it fixed firmly, because it will rely on the tank with water and a heater. Adding trim for the shower, it is better to choose the most suitable to the exterior of the suburban area, the house. It can be polycarbonate, wood and others.
6) On the supporting structure there is a heated tank , which is sometimes used as a conventional barrel above the cabin.
On our website you can find contacts of construction companies that offer the service of assembling various turnkey economic structures. Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".
It is better to place the septic tank and drainage system a little bit away from the building, thus reducing the risk of a bad smell when washing.
Under the drain most often used are materials such as roofing felt, rolled waterproofing, iron-reinforced trough or hydro-glassiozol.
You should not use clay to create a waterproof layer, it will wash out and damage the drainage system.
For a better flow head, place a booth on a hillock whenever possible.
1 square. m. - this is the minimum size of the facility, but you should be aware that you need a place for changing rooms.
The convenient size of the booth is considered to be 190 * 160 cm (height * width)
Particularly noteworthy is the basis of the garden shower structure.It should provide strong support, withstand the weight, since it will be located weighty tank with a heating element.
For lining the frame, materials such as wall paneling, polycarbonate, film, fiberboard and other moisture-resistant coatings are used.
The special coziness and atmosphere in the country house can be created by shower cabins, combined with the house and the general style. To achieve a decorative effect, the surface of the summer shower can be painted, decorated with additional details.
For bathing in the evening it will be convenient if the light from the lantern is nearby to the shower room.
The important point is also tight-fitting and well-closing doors, as the wind can pass easily.
Auxiliary elements for door insulation are suitable sealing systems.
In case the shower is used in the winter, it is necessary to warm it. Typically, mineral wool, polystyrene foam, foam plastic are used as insulating material. Insulation is fixed on the surface with a film located on top, and fixed with a stapler.
In this video, you can take a closer look at the installed shower for giving with heated water
On our site you can find contacts construction companies that offer installation service extensions to existing turnkey homes. Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".
The tank with water used for bathing is located on the supporting pillars above the cabin. In order to cost less, sometimes choose a conventional barrel of 100 - 200 liters. Before installing this tank, a branch for the thread is made in it, where the ball valve is installed complete with a watering can.
Sources of water supply can be different, depending on the technical capabilities at the dacha:
Filling water into the tank with buckets independently;
Filling by connecting to a circulating pump;
Connecting to a water supply system.
Metal-plastic pipes are used for wiring water. By means of the crane the water stream is regulated. An excellent solution would be to equip the system with a sanitary valve that regulates the amount of water in the shower tank.
A concrete screed will serve to strengthen the structure and protect it from drafts in winter.
A pallet of wooden materials is mounted on top on which it would be comfortable and not slippery to stand on taking a shower.
Alternatively, you can choose a special plumbing sump with an integrated drain hose. Due to this, the installation will be easier and you will not need a waterproof layer below.
Often there is an error when we shower the soul: favorable conditions for the development of fungus or mold are created, due to weak ventilation, the air does not pass, and, accordingly, the walls are constantly wet.
For wall cladding or additional insulation it is important to use moisture resistant materials, this prolong the service life. Also, an interesting decorative solution will be planting moisture-resistant plants next to the shower, which will help prevent waterlogging.
It may be interesting! In the article on the following link read about the summer shower in the country.
The simplest and most accessible view is a street shower with a waterproof screen around the perimeter. Everything is arranged in it quite simply, this design is suitable for washing and refreshing in any weather.
Closing polycarbonate booth will also be a budgetary acquisition.
The price of shower cabins with a screen and from polycarbonate in Moscow: from 6,000 to 16,000 rubles.
Plastic shower cubicle with heated water is a ready-made mobile shower for summer cottage. The structure of this type will save from drafts and wind. The design is more closed and strong.
Cost of a plastic cabin: from 23,000 to 26,000 rubles
It is especially comfortable to take a refreshing shower in the cabins, which have in their construction and a locker room with a shed. Thanks to the additional space it will be more convenient to change clothes, there is an opportunity to sit and relax.
And a canopy at the exit from the shower protects from the scorching sun or on the contrary, from rain and wind. More expensive models of summer cottage showers with heated water have all these pleasant advantages.
A stall made of natural wood will look very nice, besides it is practical. Natural color will perfectly fit into the design of the dacha.
The price of a wooden shower with a dressing room and a canopy in Moscow: from 28,000 to 68,000 rubles.
The cost of installing a garden shower in Moscow starts on average from 7,500 rubles and beyond depends on the complexity of the work and features of the land.
What else you need to know about the heated shower to give will tell the video:
It might be interesting! In the article on the following link read about the shower in a wooden house: everything you need to take into account.
A heated summer shower provides hot water in any weather. The shower is a useful and necessary thing, because it gives you the opportunity to refresh yourself during a hot summer day and will be simply indispensable after a time spent in the garden or garden. Choose a suitable option among the wide range of models and at an affordable price. Such a structure has many types of structures, both from a technical and aesthetic side. The basis of all the shower one - frame, heated tank, tray and fencing. Installation is best entrusted to professionals.