photos and views, price in Moscow

The article describes the facade thermopanels with insulation for exterior finish, prices, features of the material and the specifics of installation. You will learn how using sheets with clinker tiles can, by spending a minimum of effort and time, improve the appearance of the house and significantly reduce heat loss.

Construction of cladding thermopanels with insulation

Thermopanels for home decoration two-layer construction with a base-insulation (polyurethane foam) cladding of pressed baked clay with imitation of smooth brickwork. Often, polystyrene foam is used as insulation, which, however, is inferior to polyurethane foam in its thermal insulation properties.

The base layer thickness can be 40, 60 and 80 mm, for a basement finish - 20 or 40 mm The thickness of the model ranges from 12 to 15 mm. The standard format is 240 * 71 mm, for basement varieties - 302 * 148 mm.

The insulating layer has a low thermal conductivity and prevents the heat from flowing out of the room during the cold period and, conversely, the building heats up in the heat. The clinker tile is pressed into the insulation layer: this method of panel production ensures a reliable connection of two dissimilar layers - decorative elements that simultaneously perform a protective function will not fall away from the base.

A number of manufacturers make three-layer panels with OSB-3 plate, which is adjacent to the wall surface, gives additional strength and serves as a reliable supporting basis for the entire structure. In addition, the OSP-3 has a high resistance to moisture.

On our site you can familiarize yourself with the most popular designs of houses, in the decoration of which clinker thermopanels were used - from construction companies represented at the exhibition "Low-Rise Country".

Advantages of the material

Thanks to the successful technological solution and the characteristics of the components of the thermopanel for the exterior of the house, they have high consumer characteristics.

Advantages of the construction

Front clinker thermopanels for Exterior finishes of the house are ready-made material that allows you to combine the lining and insulation, which greatly simplifies and speeds up the installation process. Their installation can be done by a non-expert: no training is required - just read the instructions. In addition, the following positive structural characteristics can be distinguished:

• Thanks to the technology of thermal pressing of tiles into a polymer, the decorative coating and insulation form a strong connection that is more reliable than adhesive.

• Since the "dew point" is located within the insulation, it is not necessary to equip the ventilated gaps on the inside of the panel. With this option, the wall will remain dry without condensation.

• The “groove and ridge” system, due to which the panels are tightly joined, eliminates moisture penetration even with oblique rain, as well as the appearance of a “cold bridge”.

• Possibility of mounting on various bases with self-tapping screws.

During production, plastic profiles are laid in the layer of insulation, thanks to which the panels are securely fasten to walls, and the heater is not deformed.

On our website you can find contacts of construction companies that offer the service of finishing and house insulation. Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".

Production technology

The building material is manufactured in factories: polyurethane foam or polystyrene and clinker tiles, which are made from clay, are the main "ingredients" for the facade sandwich. The tile is fired at high temperatures to achieve maximum material strength.

Stages of panel production:

• The die is placed in the mold.

• A tile that imitates brick or masonry is laid out.

• Plastic profiles are placed in the matrix.

• A polymer is poured in (polyurethane foam or polystyrene foam), the polymerization of which forms a solid element.

• Many manufacturers use OSB-3 to stiffen the structure.

• The seams of the sheets are covered with a quartz composition, which contributes to the strength of the structure assembled from the panels and serves as a base for mashing the joints.

How to revet the facade of the house

To revet a building clinker thermopanels are possible at any time of the year, including in winter. In addition, during the cold season seasonal discounts are often provided to attract customers in stores. Depending on the amount of work, the house lining with thermopanels takes on average 2 to 4 weeks.

Installation steps:

• Surface preparation: remove protruding elements (old finishing materials and window sills), remove dirt, old paint, peeling plaster, repair cracks.

• Carry out the marking: it is recommended to mark the lower edge 20 s below the floor level of the room, check the correctness of the line using the level and eliminate distortions.

• The starting guide is fixed by this marking.

• The first row of panels starts to be mounted from the bottom left corner of the wall, joining the elements together and fastening with screws. The seams are sealed. Then the next row is mounted.

• Then the joints are filled with frost-resistant grout for wide joints.

When a house is veneered from a bar, sheathing of profiles or wooden is installed for the installation of sheets reek If the deviation of the walls from the vertical is more than 3 cm, it is also recommended to build a frame.

You can see the specifics of mounting sheet panels in this video.

Often, thermopanels are used for interior decoration of the house: sheathe the hallway, corridors, separate areas or a fully living room, kitchen room.

It might be interesting! In the article on the following link read about fiber cement panels for facade decoration.

Thermopanels and accessories

The system of facade panels consists of the following elements:

• corner;

• privates ;

• additional;

• ordinary socle;

• angular socle.

In addition to the cladding material, you will need fasteners for the exterior facade (dowel-nails ), grout for seams and sealant.

Manufacturers of clinker panels

On the Russian market, there are klinernye thermopanels of domestic and foreign manufacturers. The range of products is constantly updated.

The price of clinker thermopanels for exterior decoration of a house depends on the manufacturer and varies on average from 1600 to 2500 rubles per square meter. The cost of sheets for finishing the base is higher, because for their manufacture is used massive clinker tiles.

Due to high quality, KPK Termosit (Russia) clinker panels are widely in demand, which are produced by the company according to its own patented technology. Among domestic manufacturers, whose goods are in considerable demand, can be distinguished "Forsk", "Fried".

Foreign manufacturers are mainly represented by German brands: ABC Klinkergruppe, Röben, Westerwalder Klinker, Wandstein and others.

It can be interesting! In the article on the following link read about wall panels for decoration of country houses.

Conclusion

Despite the high price, compared to many finishing materials, thermopanels are in considerable demand because they protect the house from moisture and retain heat in the room, and their installation does not take much time.

Rate this article, we tried for you