Among the various finishing materials, the role of clapboard is often underestimated, and the design of a room in a country house with clapboard is considered outdated. The article describes the current trends in the use of natural and painted panels in the design of various interiors. You will get acquainted with the advantages and disadvantages, as well as varieties, classes and varieties of lining.
Until recently, lining was associated with a modest repair of a summer house or trim baths. Modern design has opened up its wide decorative potential; the covering board took the worthy place among other finishing materials. The widespread use of previously underestimated material is explained not only by its excellent aesthetic qualities, but also by a number of functional properties, which include:
Budget price .
Easy installation . Lining is profiled in the factory; thanks to the thorn-groove system, clapboard cladding inside the house takes little time.
Additional features . Paneling helps to hide wall irregularities, as well as wiring and communications.
Additional thermal and sound insulation .
Long service life . Quality material will last 40-50 years (with proper care).
As a natural material, lining is not without drawbacks:
Wall panels are mounted on a frame, which reduces living space .
Reduced moisture resistance . Under conditions of excessive moisture and frequent temperature fluctuations, the wooden material begins to break down. Impregnation-antiseptics and competent installation help to eliminate the danger.
Low fire resistance . Before using the board it is recommended to process the fire retardant - a substance that slows down the spread of fire.
Additional expenses . For the subsequent care of the wooden surface will need protective antifungal impregnation, paint and varnish materials.
Wooden lining is a classic material for interior decoration; thanks to its ecological and natural surface structure, it fits into most interiors. The most common material has the appearance of wooden slats with a standard width of 8.8 cm and a length of 1 to 6 meters.
Installation of panels can be done horizontally (which helps to visually expand the room) or vertically (this arrangement makes room above). In addition to wooden boards, clapboard house finishing is also carried out with the help of other finishing materials:
PVC profile (plastic panels). Plastic products sheathe ceilings and rooms with high humidity (kitchen and bathroom). The material is moisture resistant and brittle. The disadvantage can be considered a small color variety - panels of white and several additional simple colors (blue, brown, yellow) are produced, which limits the prospects for the original design.
MDF Panels . Finishing material made from wood fibers and externally very similar to wood. Such panels are mounted both on the walls and on the ceiling; manufacturers offer panels of various color and texture. Like wood, the main disadvantage of MDF panels is sensitivity to moisture, which somewhat limits their use.
On our website you can find contacts of construction companies that offer an internal redevelopment service . You can directly communicate with representatives by visiting the low-rise country exhibition.
Wooden paneling, offered in hardware stores, may have different profile options:
American . Material with this profile has a high resistance to moisture and therefore is used in the external design. Due to the design features, the assembly is "overlapped", which provides additional protection for seams and an original appearance.
Euro Lining . Ideal for both exterior and interior cladding. It differs from other varieties in large size of grooves and spikes; This design feature provides good ventilation of the coating.
Calm . In the place of fastening elements with such a profile there is no decorative recess. The surface is absolutely flat, acquiring the effect of complete seamlessness. Profiled in this way, it is convenient to use the wall paneling in the decoration of both the walls and the ceiling; it is characterized by a small percentage of defects (chips and cracks) in the work.
It might be interesting! In the article on The following link read about the interior decoration of a wooden house.
Blockhouse . Such material is suitable for both exterior and interior decoration. Unlike other types of finishing panels, the front side of the blockhouse is not flat, but convex, which allows you to successfully simulate a log wall.
When choosing lining, it is important to pay attention not only to the scope of use and the shape of the profile; for interior decoration is of great importance material class. Wooden lining for finishing the house inside is divided by quality into the following classes:
Extra Class . For the manufacture of panels used high-quality wood, often from precious woods. Lining of this level is characterized by high strength, perfect appearance, no defects and corresponding cost.
Class A . The material has a well-polished surface. A small percentage of defects is allowed - no more than two in one panel. It may be a small bright knot with a diameter of up to 1 cm, but not a crack or a pitch pocket. In terms of price / quality, class A lining is the leader in keeping track of other varieties.
It might be interesting! In the article on the following link read about how to paint the lining inside the scrap.
Class B . On the front side, any knots are allowed, except rotten and fallen out, as well as small cracks and notches. The material is less attractive in appearance but durable enough and can be used for finishing a balcony, veranda or bath.
Class C . Does not differ in durability and loses to other classes in appearance and number of defects (external and internal). In this material come across all kinds of knots, cracks (including through), pitch pockets; frequent processing defects - chipped. The most budget option, but you hardly want to decorate your living room with such clapboard; the scope of its use - decoration of business premises.
For interior decoration, it is preferable to choose material from the following types of wood:
From cedar . The wood of this tree has a high density, attractive in appearance and, due to its resinous properties, has a pronounced antiseptic property. Lining of cedar is famous for its long service life and cost, which can not be called budget.
About the wall paneling in the interior of a country house in the following video:
From oak . Elite finishing material, nice and beautiful in appearance. Oak panels are rightly considered the most durable and suitable for decoration of any interiors. The cost corresponds to the level.
Of larch . Larch wood is comparable in strength to oak, but it has one more important feature - moisture resistance. Larch clapboard is used for outdoor work and in premises with fluctuations of humidity and temperature.
From pine . The most common type of finishing panels, whose popularity is due to the low cost, good performance and attractive appearance. The lack of pine material, resinous, may occur due to poor quality wood processing.
It might be interesting! In the article on the following link read about the attic finish with wooden panels.
Finishing rooms with clapboard in a private house includes the preparation and painting of the material. The appearance of the panels (and, hence, the interior as a whole) depends on the quality of painting, and the painting - on the quality of preparation; The process includes the following types of work:
In order to extend the service life of , the paneling is impregnated with flame retardants and bactericidal compounds. Damage and minor defects are filled with putty.
Panels are cleaned of dirt, if necessary are ground and coated with a primer .
For finishing, there are often used colored and transparent lacquer formulations with different properties. Polyurethane varnish does not allow yellowing of light wood, water-based varnish dries quickly and is environmentally friendly. The use of acrylic or alkyd varnish reliably protects the surface from moisture.
For painting lining in residential areas it is preferable to use water-based or acrylic-based paint .
About painting lining in the following video:
Initially, walls lined with clapboard were preferred leave in kind.Current trends suggest interior design using painted lining, indicating several important reasons for this decision:
The protective role of paint and varnish coatings . The coating protects the wooden board from premature aging under the influence of solar ultraviolet radiation. In a house with insufficient ventilation, a layer of varnish or paint will protect the wooden surface from fungus and blue.
Creative solution . Decorative advantage of lining (both wooden, and plastic) - a possibility of its toning or coloring. In such a simple way you can create both an unobtrusive, muted background, and add a bright accent.
Easy update . If you are bored with the old look of the walls in the living room or bedroom, it is easy to update it by simple repainting.
It might be interesting! In the article read the following link about the architectural features of Scandinavian-style homes.
Even if you are not a fan of using wood in the interior, do not rush to completely abandon the wood panels. The wall paneling can become an original decorative element in any room in a suburban housing, as long as the wall decoration in the house with clapboard delights with its diversity. The following uses are popular in interior design:
On the ceiling . Budget option in order to diversify the interior in any room. In non-residential rooms, finishing is done with plastic material.
On the walls . In some styles (country, Provence) it is allowed to fully finish the walls with wood panels while preserving the natural structure and color. Also relevant will be the aging of a wooden surface; the interior will look especially cozy. The wooden covering with ease will fit also into modern design.
Partial use . The use of lining for zoning rooms - a proven technique. Dividing a living room (or another room) into zones using wooden panels always looks stylish and relevant. Another option for partial use is to create an accent wall. In this case, the surface, lined with clapboard, sets the tone for the rest of the decor. For finishing use both paints, and varnishes, sometimes transparent, with nacre effect.
In the bathroom . For finishing wet placed more often PVC panels are used. The wooden decoration will add comfort to the interior, and, painted in an unusual color, also originality.
In the kitchen . Painted lining is now at the height of fashion. Therefore, it can be safely used to create an impressive design in the kitchen, without forgetting the additional processing of wood.
On the balcony and in the hallway . And also on the veranda or terrace, wooden (usually pine) panels look invariably stylish, while not inflating the budget to indecent sizes.
About the Japanese method of decorating the wall panel in the following video:
Gradually wood paneling is no longer used only for finishing cottages, gazebos or baths. Changing the established opinion, the interior decoration of the wooden house clapboard turns into a design technique that is claimed by designers. A relatively inexpensive natural material perfectly combines with other facings and becomes an indispensable element in the decoration of the premises. Lining is used in the design of interiors in the following styles:
Village styles . Country, Provence, Chalet and Russian styles are widely used wooden materials, and lining (especially aged) will be most welcome. You can not limit yourself to a palette of natural shades. In the living room, decorated in the style of Provence, the walls can have soft beige, olive and lavender shades, which ideally combine with plastered surfaces and the floor of natural wood.
Japanese style . Associated with rigor, modesty and minimalism. With wooden panels, you can make a bright accent on the ceiling or walls, if you use the material of dark shades.
Hi-tech and loft . The stingy decor and restriction in the choice of colors does not preclude the use of lining at all. It will be appropriate as an accent on one of the walls or as an element of space zoning. To smooth the texture of wood, the surface can be varnished or covered with gloss paint, so it will get a modern look.
Scandinavian style . The interior in the Scandinavian style includes a wooden floor and ceiling, as well as walls lined with horizontal clapboard and painted with white paint. The combination of white with gray and pastel shades makes the space of the room refined and visually expands it.
Eco-style . One of the modern areas where the use of wooden wall paneling is welcomed. Unlike the Scandinavian style or Provence, which is also close to nature, here wood surfaces are not painted. All that is allowed - primer, stain and varnish.
It might be interesting! In the article on The following link read about the house with transparent walls.
Lining allows you to create an interesting texture that cannot be achieved in other ways, and this is its main advantage. Full decoration of the walls with wood panels in modern interiors is used less and less. A better idea is considered to be partial trimming or the use of an accent wall; it is often painted in the same color as the other walls. The variety of textures is enough to make the interior look stylish and elegant. Also an interesting result can be achieved if you use different colors and their combinations, or limit yourself to several shades of the same color.
Rate this article, we tried for you