The decorative pond, despite the difficulties in design and installation, was and will be a real decoration of the site. But the arrangement of the reservoir can be greatly simplified if you buy a plastic pond to give. The article describes the varieties of such structures, which are used for their manufacture of materials, their characteristics and features. Recommendations on the choice of the pond shape and examples of beautiful design
Despite the apparent simplicity; a plastic pond can be a major element of landscape design. At the same time, it must be borne in mind that the arrangement of the pond requires monetary investment and labor, and all work must be carried out carefully and with all technologies adhered to - only this approach will allow achieving an excellent result. It is required to choose the most optimal variant of the device of the pond, while the decorative elements can be introduced gradually. When choosing a reservoir, it is necessary to study what forms, designs, sizes, materials and other nuances are.
Virtually any plastic pond is installed using the same technology. Some models go deep into the soil, others can be mounted on the surface. Ponds can have the most various form, the sizes and various styles of registration. For such a decorative element is not necessary to equip a large or deep pit. There is no need to install heat protection and increase the strength of the whole structure. But if it is not planned to combine a decorative pond with a pond that can be used for swimming. For decorating a reservoir can be varied, as well as its shape and size. The only requirement when choosing a model is to clarify the future purpose of the reservoir being installed. This will affect the choice of installation point, size, shape and some features of the design.
It is cheap to buy a plastic pond for giving from the following materials:
PVC is an inexpensive material, serves for a very long time, resistant to tears, used for small decorative ponds;
butyl rubber - can withstand large stretches, is resistant to tears and damage, is used for the largest forms, can be mounted at any time of the year;
Polyethylene - rigid walls , inexpensive option, reliable forms, various sizes , simple installation, serves about 10 years;
Fiberglass - durable, last up to 30 years, not afraid of frost and sunlight.
The water in an artificial reservoir does not require special chemical treatment, but it is necessary to maintain the biological balance. This will avoid such troubles as clouding, plant dying, the development of insects, algae and unwanted microorganisms, the water will not bloom. Construction work is carried out in the warm season, after the groundwater leaves. A project is being developed in which the features of the reservoir, the combination of shapes and sizes are taken into account, the scope of work and materials is determined. The whole landscape should be holistic and harmonious.
On our website you can find contacts of construction companies that offer design and execution services house landscape turnkey. Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".
A place for a pond is chosen in accordance with its shape and size, taking into account the features of the site itself. The purpose of the reservoir will be the main aspect of the selection point of its installation. Decorative pond is recommended to put in the south or west in open space. If you plan to buy a garden plastic pond for keeping fish, then it is necessary to ensure the maintenance of a constant optimal temperature. In this case, the sun's rays should not fall on the reservoir for more than five hours in a row.
When choosing a place for a pond, you need to select a point where there is less drafts, and the illumination lasted no more than 10 hours. It must be understood that the constant wind will interfere with the growth of high vegetation, and the sun leads to the constant development of algae. However, if the light is not enough, the plant growth stops. Along the pond you can plant tall plants that will give a little shadow. However, no large flowers and trees that can give a lot of shade and litter the pond, and strong roots can break the pond. In tight to the form does not need to lay the lawn. The space around the pond should be open for airing.
It is very important to choose the right place for a plastic pond to give.In addressing this issue, we should not forget about the features of the relief in the territory. Any natural indentations on the landscape can be used to set the shape. When arranging a slide or cascade, there should be a hill near the place under the pond, it can be created artificially. The reservoir should be in a valley, otherwise it will be necessary to monitor the water level all the time so that it does not overflow.
Natural water bodies can be further supplemented artificial forms. If it is only artificial, then it is recommended to place it closer to the house, so that it is easier to connect the communications (electricity, pipeline). The minimum distance to the building must be at least two meters. Properly chosen place will allow for a long time to enjoy the pond without problems in the form of water blooming. At one point, you can apply different style solutions, but everything must be carefully considered.
On our website you can find contacts of construction companies that are working on installment payments for construction services. Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".
Experts recommend choosing a pond, the size of which will be approximately 3% of the area. To save space, you can make a smaller body of water, but we must remember that it is easier to take care of large ponds. This must be remembered, because a small body of water will have to be constantly monitored and cleaned. In a large pond, you can plant plants and living organisms that will help.
When choosing the depth, you need to decide whether to use swimming pool - if not, then you don't need a deep form. There are options with different levels of the bottom, with a maximum depth of 180 cm. Single-level forms have a depth of mainly 50 cm, it can only be used for plants, but not for keeping fish. When choosing the length and width it is necessary to focus on the harmony of the reservoir on the landscape.
The shape of such a pond can be very diverse:
in the form of a rhombus or oval, and so on.
Some of them have a strict classical look, which means that they are selected for the same paths, buildings and decorative elements of the site. Basically, reservoirs of regular shape are settled near buildings, which allows to emphasize straight lines. For their construction requires less investment, time and effort, they are easy to care for. Rounded models are more practical, they have no corners where garbage is often collected, which is sometimes very difficult to remove.
For the features of site selection and installation of a pond based on a finished bowl, see the following video:
A decorative pond for gardening from a finished plastic form with various coastal outlines allow to realize the most diverse fantasies. Their advantage is considered a natural look, which makes them very popular. The gentle slope of the coastline is formed by various stones and plants, which gives it more naturalness. But here it is necessary to arrange everything correctly to get a good result.
It may be interesting! In the article on the following link read about the full-size pond in the country.
depends. Before you buy a decorative pond to a country house, you need to choose a place for it and decide on the dimensions. After the form has been delivered to the site, a pit breaks out under it, the bottom is leveled and rammed. Then the bowl itself is placed and completely filled with water. Supports are placed under the protrusions, which raises the bottom and the pressure is distributed. Around the pond, the ground is poured on half of it and poured over with water; in a few hours the ground will settle. After that, the soil is poured over the level with the landscape and then poured over with water, you need to wait a day, after which you can begin to decorate.
If it is necessary to store the bowl in winter, it should be prepared. Plastic can withstand severe frosts and does not break. Water can be left, but it should be level with the ground. To reduce the pressure of ice on the walls in the water are placed plastic bottles at the rate of four pieces of 1.5 liters per square meter.
It is possible to decorate a site not only with bushes, flowers, decorative elements, but also with artificial reservoirs. It is enough to buy a pond made of plastic, which is made out of stones and various plants.Depending on the size of such a reservoir, it can only be an ornament, other models allow keeping fish, and still others can be a substitute for a pool. The cost of an artificial pond can start from 500 rubles, and the most expensive models will cost more than 150 thousand rubles. The price is affected by the size of the product, its shape, color, material used and some other features. Such a pond has a natural look and is the main decoration of the site.
It might be interesting! In the article on the following link read about a cozy cottage in modern style on ocean shore.
To equip a beautiful pond at the dacha, you can use typical solutions and buy a ready-made bowl for ponds and fountains. This will significantly save time on the development of the project, and in addition, even a typical bowl can be decorated outside the box and get an original landscape design