Proper care for the false-beam finish includes the timely painting of this material. It is important to know what paint to pick up in order to paint the imitation of a bar qualitatively and reliably. Periodic processing of wood with a properly selected paint guarantees the flawless appearance of the interior and exterior walls of the house. Paintwork materials on wood panels maintain the safety of products for many years. But in order for such a defense to be correct, you need to know how to paint an imitation of a bar inside the house, with which we will now try to figure it out.
Types of paints
All paints intended for the treatment of simulation panels are divided into transparent and opaque formulations. The first ones are irreplaceable where it is necessary to protect wooden panels from the harmful effects of the environment, while maintaining the original texture of the false bar. For these purposes, varnishes or glazes with good protective properties and light decorative effects are acquired.
Lucky are in turn subdivided into:
- Acrylic.
- Aqueous emulsion.
- Polyurethane.
- Epoxy.
Varnishes can be completely transparent or with a moderate tint, after applying they form a film on the imitation of a bar. Flowable glazes with protective components penetrate deep into the wood and leave a beautiful frosted shine and desired shade on its surface.
Non-transparent coatings include:
- Acrylic paints.
- Alkyd emulsions - oil and enamel.
- Water dispersion paints.
If you apply an opaque paint to the imitation of the beam, the real wood image will be completely painted over with pigments.
Paints for interior decoration
Primary paint function imitation timber inside premises - decorative purpose. Interior wall decoration usually does not impose special requirements for protection. Exceptions are rooms with high humidity - sauna, bath, bath, kitchen. It is advisable to process such rooms with stronger paints. In other cases, the emphasis is on the decorative properties of the compositions, for which opaque coatings are selected, creating the necessary textural effect.
The range of coloring compositions for interior walls consists of the following positions:
- Oil paint.
- Enamel.
- Acrylic paint.
- Alkyd paint - for baths, saunas and swimming pools.
On our website you can find contacts of construction companies that offer the service of finishing and house insulation. Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".
Choice of painting material for exterior decoration
The external cladding board can suffer from the effects of sudden temperature changes, precipitation, and scorching sun. The main criterion for painting imitation timber outside the house are the protective properties of the coating. Change the appearance of the panel here is in second place.
Assortment of facade paints under the timber:
- Professional - applied using a special technology.
- Alkyd.
- Acrylic.
- Silicone.
The topcoat protects the panel from destruction as much as possible. Painting with a decorative layer for the best effect is performed in three stages. What exactly paint imitation timber outside depends on many factors - each paintwork is different in price, durability, technology of application. To cover the imitation of a timber, the acrylic variety of compounds has proved itself well. Facade waterborne paint, bonded with silicone resins, has decent characteristics: resistance to moisture, cracks, abrasion. However, silicone paint is not as common in household repairs as other types of coatings, due to the overestimated cost. A good choice in terms of price - quality are alkyd enamels.
Service life of various paints
One of the quality criteria for paint applied to an imitation beam is the service life of the coating.The time during which the paint performs its functions for each type of paintwork is different. The operational capabilities of paints to some extent depend on the preparation of the painted surface and the technology of coating. In many ways, the durability of paints determines the degree of aggressiveness of the environment.
If during the production of paints all the requirements of GOST were met, the coating acquires the properties indicated in the description . Accordingly, the correct choice of coverage ensures a good result for many years. Operating characteristics of paintwork materials for wooden bases:
- Oil paint based on natural varnish - no more than 3 years.
- Enamel based on alkyd resin - 10 years.
- Acrylic paint with polyacrylate binder - at least 8 years.
- Water dispersion coating with an organic solvent - 20 years.
- Water-dispersive mineral-based - 10 years.
- Silicone-based silicone resin - 20 years.
If the treatment of the exterior panels is carried out with a transparent coating, you must be ready for re-painting in 2 to 3 years.
Preparation of paint
The paint and varnish market today is filled with various types of coatings. For better products, the supplier sets fairly high prices. It is important to correctly guess the amount of paint, so as not to further undermine your budget with unnecessary waste. Interior and exterior imitation of the timber is covered with paint in several stages, this should be taken into account when preparing paints and varnishes. A smooth wooden surface, unlike a rough one, absorbs much less paint.
By multiplying the total wall area by the number of paint layers, you can find out how much paintwork will need to be purchased. material for exterior or interior painting. Paint consumption may vary if diluted with a solvent.
It might be interesting! In the article on the following link, read about painting a log house.
Preparation of imitation timber for painting
Regardless of the type of paintwork material, the surface of the cladding board should be properly prepared before painting work begins.
As a rule, ready imitation panels for a bar are already ground and do not require additional machining. Except when you need to remove the old scaly layer of paint, dirt and dust. The clean treated surface improves the adhesion of paints and varnishes to wood. Preparation of the finish also consists in protecting the wood from fungal infections.
Additional mechanical treatment can give the tree a more pronounced naturalness. To do this, it is convenient to use a special brush with stiff bristles, leaving behind small recesses in the wood. This method of preliminary preparation is appropriate, if you intend to apply a transparent paint.
Antiseptic preparations are suitable for the processes of decay and deformation of wooden panels under the timber. Most paints are beautifully applied to imitation timber, so priming a wooden surface is not required. Painting works start after the final drying of the compositions on the surface of the base material.
Painting the interior walls under the timber
The interior atmosphere of a room depends largely on comfort and coziness. To achieve the desired result, you can use the original trim under the timber. Lumber will retain their decorative properties for a long time if they are periodically treated with special paint to imitate a timber inside any room.
Practical tips:
- When mixing the dye composition, you must observe the proportions provided by the paint manufacturer. Information about this is contained on the packaging of the product.
- For work, you will need a painting tool. An ordinary brush is resistant to chemicals and withstands stress.
- To avoid smudges and unevenness of the layer, you need to work slowly and carefully, immersing the brush in the composition of up to half the bristles. A small amount of paint on the surface is distributed as thin as possible.
- For large volumes, it is convenient to apply the composition with a roller or spray gun.
- Repainting is possible after thorough drying of the first coating layer.
Modern interior paints are non-toxic and do not have a strong odor. It is safe to work with such formulations even with prolonged contact.
In more detail about painting of walls from a false beam inside - in this video.
Painting the facade under the timber
The exterior painting of the imitation finish by the technology is not much different from the internal painting.Specific skills and equipment require the use of professional trains, so this work is rationally entrusted to specialists. Before painting, wooden panels for timber must be prepared as described above. After opening the coloring composition is thoroughly mixed. For the spray gun, the paint is pre-diluted with a solvent.
Features of the application of external paint:
- If necessary, use protective equipment.
- For work, choose dry and calm weather.
It may be interesting! In the article on the following link read about the coloring of a house from a wooden bar.
Conclusion
With the help of modern inks, you can refine the already stylish finish of imitation timber. And even if, for some reason, the shade of paint does not feel like it, you can always replace it with a different tone, and then your house will look different. The range of coatings on the market today, allows you to realize any design ideas.
Search
Related Articles
Paving slabs for tracks in the country, price per m2 in Moscow
One of the final stages of landscaping the backyard territory is the design of the tracks. The answer to the question what material is optimal is not always obvious. Paving slabs for tracks in the c...
types of apron, the minimum height and the device of the junction of the parapet to the flat roof according to the SNiP
Roof parapet - a structure that performs not only an aesthetic, but also a practical function, can be installed on roofs of any shape and size. In our article, you will learn what it is being assemb...
Buy a house from a laft, projects and prices in Moscow
When planning the construction of a house, one of the main issues is the choice of material. If the aesthetic requirements for the appearance of the building each have their own, then such criteria...
Which house is cheaper to build - wooden or foam blocks: an analysis of current proposals
Construction of a private house, cottage or a small garden house on its own land requires clear planning and constant monitoring. First of all, the owner is important to determine the material. Of c...