nuances, features, costs, and what to prefer, taking into account the characteristics of the site and home

With the onset of summer, there is a desire to go somewhere and rest. But not always it turns out. There is an option to arrange a real oasis in your yard. Install a pool and water treatments can be enjoyed in the open air, without leaving home. Manufacturers offer a large selection of models, so finding the right structure will not be difficult.

Choice features

Before you buy a prefab pool for gardening, step up to this question with all responsibility. To begin with, it is necessary to clarify the following nuances:

• Decide on the purpose of the structure. Who is the pool for - for children , adults or just as decorative decoration.

• What bowl sizes will be as far as go into the soil.

• If the future water body is supposed to be large sizes , deep , it is necessary to clarify information about groundwater waters.

• Think over the filling system and drain , as well as the cleaning system .

• It is necessary to calculate the dimensions of the bowl, taking into account the free area in the area.

• Find solar place located away from the neighbors.

Please note that the pool should be located at a distance of at least 2 meters to the nearest plants and 5 meters to the trees. This design is not located near the outbuildings.

Each model has a certain depth, if the bathing device is intended for a small child, the depth should be safe for such age You can start with a small inflatable product.

Inflatable pool

Usually, inflatable models are made of PVC film, in the form of a double cover. The upper ring is inflated, the bead edge serves to reinforce the structure. Through the hole in the board enters the water.

Please note that the smallest structures do not have a filtration system. Inexpensive products from 2000 to 20 000 rubles. The most common sizes are:

• Diameter 2.5-5 m.

• Depth 0 7-1,2m.

At note ! For adults it is better to choose a depth of 1.2 m, in such a structure it will be comfortable to swim.

Installation

Such a collapsible pool for the garden, the easiest to install. You do not need much time to prepare the place.

It is necessary that the area where the inflatable pool will be installed meet these requirements:

• the surface must be dense , without slope;

• No recesses, holes, bulges;

• Before setting , remove all garbage .

It is important ! It is advisable to lay a strong film on the ground. This will protect the bottom of the structure.

Pros

The compact model in the assembled state. If you need to move the pool to another location, it will not be difficult. Constructions of any size can be transferred to a passenger car.

Minuses

The design does not have a frame, so it is not advisable for adults to lean on board. In low-cost models are not provided for water purification. It is required to clean the bottom frequently.

Frame models

They are divided into two types:

• Stationary , such models have a one-piece bowl and a frame .

• Collapsible structures, in such views the frame is assembled first, then a bowl is fastened on it.

The inflatable pool is easy to store, you just need to take care of a safe location, in order to accidentally damage or pierce the film.

Frame collapsible pools for summer cottage are:

• Core ;

• Sectional .

The structures differ in the structure of the frame and its fastening, they can also be divided into seasonal and frost-resistant types. The first option is removed for winter storage. Frost does not require installation, it will only be necessary to follow the rules for operating the facility during the winter period.

Core frame pools

Frame models, or rod, in fact, improved inflatable structures. There is a metal frame, consisting of horizontal and vertical racks. Includes pvc case and pump with filter. Addition may be a water heater, lights, small stairs. You can find and buy a collapsible pool from 7,000 to 30,000 rubles.

Installation

This type of pool also does not require plenty of time to build. The framework, with a cover is established. Further, the material must be well straightened so that there are no problems during the filling of the tank with water. Mounted pump with pipeline. The design is ready for operation.

Please note, this structure should be covered at night, so the water cools more slowly and is not contaminated by various debris, dust, foliage.

Our site contains 183 villages with the best land plots in the Moscow region in all directions. You can independently choose for yourself the best option, using the filters and set the desired distance from the Moscow Ring Road, the availability of communications and infrastructure, area, cost per hundred square meters. Or use the application form for selection and representatives of the exhibition "Low-Rise Country" will make an offer based on your wishes.

Pros and cons

There are many positive qualities in this model:

• Such a product is more stable to the loads, but still getting on board and diving from it also is not recommended .

• There are any shape and sizes in diameter and depth.

• Model comfortable in installation. It has a long service life of up to 10 years.

There are also negative sides:

• It is imperative to observe hygiene rules .

• Shower and toilet take before bathing in the pool.

• A large amount of water is not so easy to distill.

Decide in advance how long it will take to fill the container. With a weak pressure and a large volume of construction it may take more than one day. Consider where the water will merge when the cold comes and you will need to clean the pool. Be sure to think over and prepare a place where it will be stored to avoid damage.

On our website you can find contacts of construction companies that own a full cycle of their own production, provide services without prepayment , provide a loan or installments for construction , and also take in offset of the means of the parent capital . Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".

Pool consisting of sections

This model consists of sections made of plastic or metal, sometimes stainless steel or wood. Inside which stretches the bowl of PVC material. This is a sturdier construction compared to the core frame. Side panels add strength to the pool walls. Such models can reach 7 meters in diameter.

The larger the volume, the greater the likelihood that you will need design to deepen into the ground in order to be more sustainable. The cost of such models is from 50 to 130 000 rubles.

Video review of the BESTWAY frame pool at the dacha (3 years of operation), as well as preparing the site and setting up how and what to treat the pool, cleaning the pool, installing and connecting a filter pump, water disinfection:

Installation

Such a structure does not require lengthy assembly. The design is going in one day at the prepared place. This model does not need to disassemble for the winter. The walls of frost-resistant models are reinforced, which allows the pool to withstand loads of frozen water. Usually such models have a skimmer and filter system.

Advantages

Models come in various shapes of different sizes in diameter and depth. Dismantling for the winter is not required due to strong walls that can withstand heavy loads.

Disadvantages

We will have to solve problems with water turbidity, the smell of chlorine and other causes of water pollution if the pool is open.

In order for water not to bloom, special preparations are added, in which case the water will have to be changed no more than once a year. If the structure overwinters at the site, the life of the package insert is reduced. It can be purchased separately.

It may be interesting! In the article on the following link read about the choice of a frost-resistant pool for the dacha: types and characteristics.

A variety of models

It may be interesting! In the article on the following link read about SPA pools for gardening: stationary, portable, inflatable.

Summary of the topic

The combined pool for giving is convenient and comfortable, it can be easily assembled and also removed from the site. Move to another place if the situation is tired or there is a need for urgent change. Such models will be a wonderful variety of daily leisure activities, as well as a useful device for taking water procedures.

Rate this article, we tried for you