material properties and characteristics, application, price per roll

Among the variety of rolls of insulating covering materials, glass insulation from TechnoNIKOL is particularly popular. In our article we will analyze the types of material where it is used, as well as the rules of installation.

What is Stekloizol

Stekloizol is a roll soft covering and waterproofing material . The basis of it can be fiberglass or fiberglass. Depending on the application and coating of the top layer, the glass insulation has different markings.

Fiberglass is made from fiberglass cloth with a layer of bitumen and special chips being applied. Depending on the scope of application, it is divided into 2 groups: lining and roofing.

In order to distinguish between the type of material and its application area, I use marking. Roofing glass insulation is designated by the letter K. The upper side of this material is covered with crumb, thanks to which the roof receives additional protection from mechanical damage.

Lining stekloizol is labeled with the letter P. It is used for waterproofing foundations and in the form of the bottom layer of the roofing "pie".

Properties of stekloizol TechnoNIKOL:

Due to its excellent properties, attractive appearance and low price, glass-liner TechnoNIKOL is widely used for roofing flat roofs of utility rooms, as well as for waterproofing underground and above-ground structures.

The material has the following characteristics :

• moisture resistance ;

• flexibility ;

• elasticity ;

• low thermal conductivity ;

• high sound insulation ;

• strength .

Stekloizol TechnoNIKOL has several varieties which differ in their composition, properties and scope of application:

Stekloizol HPP

This lining coating is used for the bottom layer of the roofing "pie". Its main function is to protect the roof from moisture. The basis of stekloizol HPP consists of fiberglass (X), which is coated on both sides with a polymer film (PP). A significant disadvantage of it is fragility. Stekloizol HPP requires a certain skill and skill in installation, and is also very demanding on the basis on which it is laid.

Stekloizol HKP

Used for the top layer of the roofing pie. The basis of the material consists of fiberglass (X), which is reinforced with a bitumen layer. A layer of crumbs (K) is applied on top, and the bottom layer is covered with a film (P). Stkloizol HKP is used to overlap flat roofs that are not in use.

On our site you can find contacts of construction companies that offer services of design and roof repair . Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".

Stekloizol TPP

The basis of this material is fiberglass (T), and on both sides it is covered with a plastic film (PP). Stekloizol TPP is used as a waterproofing coating. Thanks to the fabric basis, this type of coating can be used on the areas of roofs with a slight slope, for waterproofing the foundations of high-rise buildings, basements and swimming pools.

Stekloizol TKP

The material is used for the top layer of the roof. Together with the lining material Stekloizol TKP forms an excellent strong roofing "pie". Its basis consists of frame fiberglass (T). The outer layer is covered with coarse gray or green chips (K) and the inner layer is covered with a polymer film (P). Due to its high strength, this type of roofing is used for roofs that can be operated, on sections of roofs with a slight slope, to repair old roofs in a single layer.

Regardless of the material labeling, this type of coating has common characteristics. With proper installation and proper care, the life of the roof of glass insulation can reach 15 years. It is worth noting a number of factors that affect the time of operation.

• careful preparation of the base for the coating;

• compliance with of all points of the process;

• experience and decency masters .

Rules for installing stekloizola on roofs

In order for a material to last a long time, it is important to make its installation correctly. Laying the roof produced in several stages .

1. Preparation . Old roof must be removed completely. All cracks, chips and potholes are plastered. Then put 1-2 layers of primer.When laying the material on a wooden base, it is immediately necessary to make a crate of boards that are covered with mastic.

2. Material tailored immediately before laying in place. For better work, it is necessary for the material in the roll to stand on the edge. So he will finish a little.

3. The laying starts at the lowest point of the roof. The first layer is laid bottom waterproofing layer. Be sure to follow the uniform heating of the material. The next row overlap the first. Places joints should be glued additionally.

4. The top layer with granite sprinkling is laid in the same way. When installing it is important to monitor the uniform heating of the material, to avoid its overheating. After installation, you need to go several times skating rink. When laying the roll roof should avoid the appearance of bubbles.

It can be interesting ! In the article on the following link read about roofing materials for the roof .

A special material must be used to protect walls and the foundation from excess moisture and destruction. Roll material is used in the following cases :

• to protect the supports of the house inside and outside;

• for insulation of tape foundations at the basement level;

• for insulation along the line of foundations with the walls of the buildings;

• for waterproofing slabs of the foundation.

Technology of laying vertical and horizontal waterproofing

Works are performed inside and outside the walls of the basements. With a low groundwater level, roll insulation will do an excellent job. Work is carried out in several stages :

• cleaning of the basement walls from dust and dirt;

• plastering large holes and chips;

• priming of the base;

• cutting sheets , it is imperative to do with a 10-15 cm crush of one row on another;

• strengthening of corners and foundation joints;

• to achieve the best effect, it is better to glue several layers ;

• the finishing step is applying a layer of mastic or varnish.

Horizontal insulation is needed at the joints of the base and walls of the building, as well as for slab foundations. For maximum effect, two layers are enough. Laying rules for slab and strip foundations are the same as for roofing.

How is the installation of stekloizol - in the following video:

It may be interesting! In the article on the following link read about modern "House of the Earth" .

Conclusion

In our article we covered how to choose one or another type of glass insulation from TechnoNIKOL, as well as its installation rules and scope. Despite the similar characteristics of materials, it is worth paying special attention to its labeling and correctly selected for those or other purposes. A high-quality and conscientious installation will be the key to long-term operation.

Rate this article, we tried for you