Lazhi - proper storage of the wheels in the garage, what you need to know to ensure the proper care of tires and wheels

This article will be useful for any motorist, because it will focus on the proper storage of tires using devices such as a rack for wheels in the garage. This addition is very convenient and practical, in addition, it will save parts from damage and falls. In addition, like other tools and materials, automotive components and assemblies must not be located on the concrete floor, but on special shelves. After reading the text, you will learn about the conditions in which the tires should be stored, what are the shelves and other accessories for the wheels in the garage and how the tire rack is made.

Under what conditions should the wheels be stored in the garage

when properly stored and care protectors and wheels will last much more. The benefit from this is obvious, it is unlikely that anyone would want to spend extra time buying new wheels. Following the rules for keeping them in your garage is quite simple and inexpensive. Therefore, if you love your vehicle and save a family budget, be sure to listen to the recommendations of this article.

• The room must have an appropriate temperature . However, this requirement is fairly easy to fulfill - manufacturers claim that rubber tires can be stored in the temperature range from -30 to +35 degrees Celsius. But if the room unheated and when storing the wheels in the garage, the tires were for a long time at a temperature below +10, then it must be warmed before 18>. You also need to pay attention to the fact that the racks should be no closer than one meter from heating batteries.

• For better safety of wheels they should be stored on special shelves , racks and stands . Such storage spaces should have a flat surface and smoothed corners , because if the rubber is on a sharp surface for a long time, a trace remains on it. Protectors, the standard of which does not exceed 205 millimeters, can be stacked vertically on each other. But do not put stacks above two meters. More than large wheels fit horizontal rows.

• UV protection is mandatory. It destroys the structure of the material and because of this, the rubber too quickly fails . After prolonged exposure to sunlight, there are cracks that are very difficult to see with the naked eye. Their presence creates the danger that the wheel will burst when driving . And this often leads to very serious consequences.

In addition to these conditions, a good condition for tires after storage is their regular turning. This should be done at least once every three months. Such a procedure is necessary to change the contact surface, so that the wheels are not subjected to constant pressure. It is also desirable that the humidity in the room was 40-60%, and the constant cleaning protects the rubber from dirt and dust. Also for these purposes you can purchase a special paroizoliruyuschy awning for shelves and shelves.

Important! Before putting the wheels into the storage system in the garage, you must wash and clean them thoroughly and then dry them well.

Great care should be taken to protect the garage from various gases or vapors. Most often such troubles happen because of the wrong equipment. Also detrimental to the condition of the wheels affect the impact on them of oils, solvents or gasoline. Protectors must be protected from all chemicals and reagents. In addition, next to the racks there should be no metals susceptible to corrosion.

The disks are the most susceptible to moisture and dirt. Therefore, when storing them separately from tires, the room should be as dry and clean as possible. But most often the wheels are stored in the collection, because then they will be enough just to sort out when installing winter and summer tires.

If your room for a car is built of metal, then you will need to pay special attention to temperature and humidity. Also in this case it will be convenient for you to use the shelves to store the wheels in the garage on the wall. Especially important for the preservation of rubber and discs the presence of a hard floor and high-quality and extensive ventilation.But in any case, if you plan to store the wheels in any room, then you should measure the level of humidity and temperature and compare the readings with the norms presented in this table:

Such parameters are set in our country by GOST and are based on research and experience. Fulfilling them, you will create optimal conditions for storing rubber on racks in your garage.

The most popular manufacturers and construction companies are gathered at the exhibition and presented on our website. Here you can find contacts, choose and order any service, including installation of metal structures (sheds, greenhouses, etc.), roof repair, construction of fences and fences. Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".

What are the accessories for storing wheels in the garage?

To improve the storage conditions, various devices are used, which are metal and wooden structures with a large margin of safety. These can be shelves or racks for storing wheels in the garage, as well as hooks for hanging them on the wall.

Shelves are movable, stationary and rotating. They often have a strong frame and the shape of a rectangular parallelepiped. Such stationary devices consist of five frames, firmly fastened together. It is also necessary to have attachment points to the wall so that the whole structure does not roll over due to weak rocking. In the case of the use of hanging shelves, special attention should be paid to the hooks and brackets on which they will rest, because such storage space in combination with the wheels weighs quite a lot.

Our website presents the 27 most popular projects of garages from 106,700 rubles. And also you can familiarize yourself with the most popular projects of other buildings - bathhouses, gazebos - from construction companies represented at the exhibition "Low-Rise Country".

You can also use wheel hooks, which are metal pins on the wall, designed to hold tires and wheels on them. Another good option is a stand for storing wheels in the garage. Externally, it is very similar to a rack, but differs in that it can be moved throughout the area of ​​the room, while the rack is firmly attached to the wall. It can be in the form of a metal rack with a solid base, and it can look like a shelf with legs. Many private workshops make such devices for a relatively low price.

Overview of racks for storing wheels in a garage made of high-quality steel resistant to corrosion:

The technology of making a simple rack for wheels

The design must necessarily be durable to withstand the weight placed on it. And also, if it is a tree, then it should be covered with antiseptics to protect against the fungus, and if it is metal, then it should be painted to prevent corrosion. Most often, manufacturers make racks for wheels in the garage of the profile using welding. For shelves, chipboard, thick plywood or fiberboard is used.

First, in any case, a sketch of the future product is created. All further work is based on this project, because it contains the necessary dimensions and dimensions, and also indicates the attachment points and types of accessories.

It can be interesting! In the article on the following link, read about the finished projects of garages with sizes and photos.

Then the metal profile is cut with an angle grinder, and the corners are carefully polished. After that, usually proceed to the docking of all components. Do this with the use of welding or screws.

The next stage is works on painting and varnishing the frame. To do this, you should use only high-quality and proven compounds, because the rack is in direct contact with the wheels themselves and it is impossible to resist corrosion.Paint is applied with a thin layer several times.

The video offers detailed instructions for mounting a rack for storing car wheels:

Next you need to make shelves that can be made of wood or sheet materials . They too should be varnished to avoid the appearance of fungal diseases on their surface. Then attach the strips designed to ensure that the wheels do not roll out of storage. At this assembly rack for storing wheels ends.

Such a device is quite inexpensive and can be purchased at a home improvement store or in a private workshop. Despite its simplicity, it is able to create optimal and very convenient conditions for storing tires and disks.

It can be interesting! In the article on the following link read about the construction of a garage in Moscow, the price for turnkey work.

Conclusion

Racking for wheels is a very practical and convenient device that is designed to properly store tires and wheels in the garage. The use of such a device preserves the resource of rubber, and also frees up a useful place in the room. Surely, after reading this article, you have learned a lot about the racks and shelves, as well as the storage conditions of the wheels in the garage. Now you can buy a proper and convenient place to store tires and wheels.

Rate this article, we tried for you