The size of the front door in a private house, the standard width of GOST, height with a box, the selection of boxes and linens

A private house “by default” needs a sturdy, design-appropriate door with good thermal insulation properties. Functionality and practicality are mandatory requirements, but initially the size of the front door to the house will affect the choice. They depend on the need to manufacture to order, or the ability to purchase a finished product. Moreover, the use of standard materials simplifies construction work, guarantees quality performance, long-term operation.

Required parameters

Having the same equipment and design, standard products cheaper than their counterparts, made to order, are mounted faster and easier. At the same time, the standard default models comply with the norms of SNiP for entrance doors:

• Height of the doorway is not less than 1.9 m. >

  Width not less than 0.8 m, with the number of residents over 15 people - not less than 1.2 m.

• The thickness is not strictly regulated, but it should be sufficient to perform the functions of the entrance door.

Opening - “inside or outside” SNiP also does not regulate, but according to fire safety standards, the doors must swing open towards the exit from the building.

These standards dictate the generally accepted standard dimensions of entrance doors in a private house:

• Height of the product complete with a box of at least 200 cm.

• Width with a box of 90 cm or more.

However, these GOST parameters are among the most common and affordable single-leaf products. Manufacturers, in turn, offer a wide range of entrance doors most relevant standards. By the number of options for finishing and equipment, they are not inferior to many individual models made to order.

Important! it is considered that The actions of SNiP do not apply to frequent houses. However, according to the latest editions of fire safety requirements, each doorway is also an emergency exit. Therefore, its dimensions must be not less than the permissible norms.

To emphasize the individuality of the house, a device of aperture of unusual dimensions is practiced. In order not to violate the rules, the size of such openings is determined by starting from standard ones - they change upwards. When a house is decorated with original, stylish designs, their full height, overall width, the required thickness is determined “by place”.

Non-standard sizes and solutions

Requirements of SNiP and GOST, this is only the "minimum required" for execution. In private housing construction, entrance doors are almost always an element of design, a part of a composition, and sometimes a general “art object”. For this practice, the manufacture of non-standard, but compliant with the standards of models. Conventionally, there are several categories of doors:

• One and a half . Two canvases are mounted in the box, one of which is full, and the width of the second is much smaller. Most often used with non-standard opening dimensions, the smaller sash is almost always fixed, it is used at a minimum.

• Double-wing . The unit has two full-sized doors of the same width. In the warm season, both can open, in the cold one of them is usually fixed, the main half is constantly used.

• With the transom . In the box of increased height there is one or two door leaves, and a decorative inset on top. This model is installed in a pre-planned, or non-standard height opening. The unusual design gives the facade of the building individuality and respectability.

It should be noted that in any case the minimum width of the "running" cloth is 90 cm. For convenience and safety, the size of the entrance door in a private house should not be reduced.

On our website you can find contacts of construction companies that offer the installation of doors and windows. Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".

Materials for entrance doors

The main materials for the manufacture of entrance doors: wood, metal, plastic, glass. Everything else - or their derivatives, or combinations. Each of the materials has its advantages and disadvantages, but is optimal in certain conditions:

• Wooden entrance doors . Modern technologies for the manufacture of wooden products have improved markedly; with proper processing, they acquired a previously unattainable quality - they no longer respond to temperature fluctuations and changes in humidity.This allows the use of wood for complex facade decors, structures and entrance doors. Now the beauty of natural wood is combined with durability, high reliability. In addition to the listed qualities of the material, ecological cleanliness, natural low thermal conductivity are worth noting.

• Metal entrance doors . Positioned as reliable and highly resistant to various, including vandal-breaking methods of construction. Manufacturers, given the influence of outdoor conditions, try to maximize durability. The possibilities of finishing the outer and inner sides are practically unlimited.

• Metal-plastic entrance doors . Have an aesthetic appearance, high strength, durability. Relatively weak protective properties are compensated by one important advantage - the absence of the problem of condensate and ice. Manufacturing technologies for PVC windows and metal-plastic doors are almost the same, but the materials and design of the doors meet higher requirements for reliability and safety. The box and frame of the canvas are made of a five-chamber profile, for rigidity reinforced with a reinforcing metal frame of a rectangular or, taking into account the design, of a complex section. Metal frame allows equipping doors with more reliable, powerful canopies and locking mechanisms against burglary. It is desirable to equip the door with glass with triplex or armored outer glass.

Using modern technology, the right combination of materials , manufacturers achieve high quality products. However, for the effective protection of the home and comfortable operation, even a high-quality product is important to properly install.

How quality doors are arranged, what should be the size of the entrance door in a private house and how to choose them correctly - see the video:

It can be interesting! In the article on the following link read about installing doors in a wooden house.

Selection of the box and the canvas - the nuances of high-quality installation

When ordering the entrance door, it is important to accurately determine the size of the opening in which it will be installed. It is especially difficult to make a correct measurement when a new model is purchased in advance, and the old one has not yet been dismantled - the true width of the entrance door to the house is unknown. Decorative elements interfere with free measurement: cashing on one side, slope on the other. Of course, immediately dismantling the door is completely impossible task, but you should not prevent the dismantling of the scenery to get the correct size of the opening, then it guarantees quick and high-quality installation work.

When planning the installation in the opening, it is necessary to provide for the new design to fit in it freely. Moreover, it is important to take into account the installation clearances, sufficient to install the door in a strictly upright position, to place fasteners and insulation. The width of the gap of 2 cm allows you to qualitatively fill it with mounting foam, ensuring reliable insulation.

Most often, the box is purchased complete with a leaf. However, sometimes there is a need to buy it separately, for example - increased width, in order to avoid the additional device of the slope. It is more practical to choose a set, rather than a finished product, the possibility of assembling and fitting "in place" will appear. If a ready-made door unit is purchased, careful monitoring of compliance with its door leaf is necessary.

Entry door installation steps:

• Opening preparation : dismantling the old door, trimming the planes necessary, cleaning the opening from debris.

• Installation of the door block with alignment and fastening.

• Adjusting the blade , or all the blades in the box, controlling the smooth closing, opening, checking the operation of the installed locks.

• Filling the installation gap with foam , if necessary, with additional thermal insulation materials.

• Installation of decorative elements , accessories.

What can be the entrance doors in a private house can be viewed in this video:

This can be interesting! In the article on the following link read about the door for a private house.

Professionalism - the key to success

It is clear that the design of the entrance door to a private house is a responsible and serious matter. A prerequisite for rational selection, acquisition, installation is a long trouble-free operation.It is important to link the standard size of the front door to the house with design solutions, but the main emphasis should be put on security. Therefore, at each stage, consultation of competent people is necessary.

It can be interesting! In the article on the following link read about the entrance stairs to the house.

Conclusion

It is always preferable when all the work is entrusted to a well-established reputable organization. Guarding the peace and comfort of your home should be the "right" door.

Rate this article, we tried for you