Summer is over - it's time to take stock and analyze how closely the wishes of the visitors of the Low-Rise Country exhibition are with the existing proposals. The study showed that the supply and demand for the main technologies of building houses are completely the same. Summer is over - it's time to take stock and analyze how closely the wishes of visitors of the Low-Rise Country exhibition are with the existing proposals. The study showed that the supply and demand for the main technologies of building houses are completely the same.
There are a lot of technologies used in the construction of house erection, so that any one construction company could cover them all. Therefore, many developers specialize only in what they do best.
Glued laminated timber is the most popular technology for building a house. Each fifth (20%) visitor of the exhibition sees it as a technology for building his house, and 20.6% of the exhibits of the houses presented at the exhibition are created using this technology. Seven companies, such as Good Wood, ABS-Stroy (project "Noble Nest"), CJSC 78 DOC N. M. "(project Kleone), Drevograd ( project "Lahti"), Alpbau (project Combohaus 140) and Eco House group (project "Bernini").
The great advantage of glued timber houses is that such a house does not require additional finishing and can be left in its original form.
The frame technology is almost on a par with the laminated timber. 18% of visitors to the exhibition want to see it as a technology for building their homes. At the exhibition, 8.8% of the exhibits are currently made using this technology. It is represented by three companies: MalerHouse (project "Copenhagen"), "Alvad" (project "Leon-1") and "SK Peresvet" (project "Siberian).
Every sixth house in the exhibition is a house built of profiled timber (solid) (14.7%) Have given their preference This technology is the same percentage of people who visited the exhibition. The houses of the profiled beam at the exhibition are represented by five companies, such as Shelf (bath-chalet), Ilior (the project "Ksenia Belaya Dacha"), Strela-K (the project PDS -12-82 ")," near Moscow manor s "(project" Fairy Tale ")," Vologda houses "(project" Asgard ").
It should be noted that the length of the profiled bar can be up to 12 meters, which gives unlimited possibilities in design and construction. However, consider that such a house has a slight shrinkage, but unlike a chopped log, it is less susceptible to cracking.
A house built using panel-frame technology would like to have 11.8% of visitors to the exhibition. At the exhibition, such houses are offered by five companies: “Individual House” (project “Carinthia”), Das Haus (“Chalet Tyrolerahoff”), BELHOUSE (project BELHOUSE) and “KVS-Stroy” (project Aspen Sunroof).
The biggest advantage of the panel-frame technology is the rapid construction of the house: a two-story house of 120 m2 is mounted for five to seven days. This is possible due to the fact that the cutting and adjustment of the house structures is carried out at a factory in a dry room and immediately treated with an antiseptic. The construction of the house is light, and therefore the house can be built on a strip foundation.
want a stone or block house build 10.6% of visitors to the exhibition. At the exhibition, 5.9% of the displayed houses were built using this technology. They are presented at the exhibition by two companies: SK Lesdrevprom and DomArt (Versailles).
The study showed that the demand for homes from Nowadays the rounded log is slightly lower than the offer: 9.2% of visitors want a house made of rounded logs, while at the exhibition, 14.7% of the exhibits are home from a rounded log. They are represented by five companies: Home Forest (Home Forest project), Dom-250 (Solar project), Arshinstroy (Eclectic 63 project), Lescon (Belaya Dacha project), and Golden Phoenix "(project" Phoenix Eco ").
The main advantage of the houses from a rounded log is the absence of chemicals in the process manufacturing elements of the house.
Wanted SIP Panel House every 20th visitor of the exhibition (5.6%) would be built, and every 20th house at the exhibition was created using this technology (5.9%). They are represented by two companies: New Home Group (the Granada project) and Fachmann (the Belaya Dacha project). It should be noted that today 30% of wooden houses in Russia were built using CIP technology.
Chopped log as a technology 3.5% of the exhibition visitors want to build their houses. At the exhibition it is represented by two companies, which is 5.9% of the exhibits, - "Kedrov" and "RusTerom". The technology of manual cutting allows you to choose logs with a large diameter, which significantly increases the insulation in such a house.
You would like to build a modular house on 3.3% of visitors to the exhibition. This technology is represented at the exhibition by BauWerk Rus (“Bauwerk Rus”).
Wood concrete houses are not so popular among perhaps due to the fact that very few people know this technology (0.9% of exhibition visitors).
Currently, EcoDom (project "4-180") represents the house of wood concrete at the exhibition. The main advantage of such a house is its biostability. This means that, thanks to a special treatment, the appearance of any microorganisms, mold and insects inside the walls is completely excluded.
LSTC technology is popular with 0 , 4% of visitors to the exhibition. She is represented at the exhibition by one company - StroyDom (project "Marseille").
Fakhwerk house on technology at the exhibition by peura. Almost 0.4% of visitors showed interest in this technology.
Thus, it can be stated that the exhibition of houses "Low-Rise Country" fully satisfies the demand and wishes of its visitors. And that means that any visitor can find here what he wants.
For reference! In February-August 2015, over 14 thousand families interested in building and landscaping their suburban area visited the “Low-Rise Country” exhibition.
The exhibition "Low-Rise Country" can also be visited as part of a virtual tour. You can clearly see this opportunity in the video:
At the exhibition you can not only learn information about the technology of building a house first-hand, but also see the house in real size, stop by in it, evaluate the possible design of rooms, furniture, and not just look at the house in the picture or layout. In addition, many manufacturing companies professionally build houses not only according to the technology presented at the exhibition.