The average prices for finishing the house - internal and external, depending on the materials - wall and finishing

When buying a building in which only the framework was built, it becomes necessary to “fill” this house. Therefore, how much it costs to finish the house, you can find out in our article. We will talk about the types of finishes, what materials are used for each of them, what resources will be spent. You will also learn the approximate amount that will be spent on finishing work.

Which options include finishing

Finishing work is the final phase during the construction of the house . Finishing is internal (all rooms) and external (facade, decor).

In order to find out the price of finishing a private house inside, it is important to understand what this decoration includes.

Modern life dictates its own rules. Home for us is both a fortress and a place of work. And to please the interior with both the functionality and the aesthetic component, they have long been resorting to finishing works. They are carried out after the frame of the building was built, walls were erected.

Finishing brings the invisible line under all the work, puts an end, complements the overall picture, completes it. But its function is not only in beauty, but in many respects in preventing from the adverse effects of cataclysms. A high-quality facade acts as a protection against mechanical damage, natural conventions, the appearance of corrosions (physical and chemical), fungi, mold, as well as excess moisture. Good acoustics, air exchange and light filling are partly achieved through high-quality finishes.

Types of finishing works

Finishing works are divided into several varieties. The most polar is their division according to the applied technologies:

• Plastering

Special mortar is applied to the surface in order to level or decorate it. Plaster can be of three types: ordinary, decorative and special. Plain plaster levels the walls, creating an ideal surface for subsequent decoration. It often contains granite, minerals and synthetics;

On our site you can familiarize yourself with the most popular sites in Moscow Region for the construction of a country house . In filters you can set the desired direction, the presence of gas, water, electricity and other communications.

• Paint brushes

During such work, the surfaces are coated with paint and varnish. Means can be intended, both for external, and for internal works. The price of paint for the facade is always more expensive due to the fact that the quality characteristics must be on par. They must be resistant to moisture, temperature changes;

• Facing

This concept implies the laying of various tiles and panels of natural or synthetic composition;

• Wallpaper

Sticking wallpaper of various types and of different materials: flizelin, vinyl, paper.

• Floor covering

This includes flooring work. Laminated flooring, parquet board, cork board, tile, stone or linoleum are laid or laid.

What is the difference between finishing work

The number of points that need to be done when finishing the house, Includes: the development of a unique design, the purchase of building material and the work itself.

The number of finishing works sometimes include the following:

• Plumbing work - installation of equipment.

• Electrical installation work - installation of ventilation systems and air conditioning systems, hanging lamps and chandeliers.

• The molded decor is gypsum stucco on the ceilings, gypsum panels on the walls.

• Works with plasterboard - installation of ceilings, which consist of several levels, creating a niche, partitions and decoration.

It might be interesting! In the article on the following link read about a wooden house inside: the original ideas of a stylish interior .

Exterior finish of the facade

Almost always, the finishing process begins with the primer of the building surface. The average price of a primer - 40 rubles / m².

Next step: installation of insulation. To create a cozy home is not enough to make it beautiful, it is very important to make it comfortable. Insulators will help keep the temperature inside the building: do not allow the cold in winter and the heat in summer.On average, the price for the installation of insulation is 120-300 rubles / m².

Subsequent actions may be divided depending on what type of finish was chosen:

Plaster

Depending on the composition, the plaster is divided into the following types:

• Mineral ;

• Acrylic ;

• Silicate ;

• Silicone .

There are structural (textured) and painting finishes of plasters. The first is the base, and the second is used as a topcoat.

According to the structure of the plaster, they are divided into the following:

• Fur (5,100 rubles / 25kg);

• Bark beetle (3970 rubles / 25 kg);

• Lamb (4500/25 kg);

• Paint (4480rub / 25 kg).

That might be interesting! In the article at the following link read about main fears about houses from CIP panels - the mythology of construction .

Facing with materials

The following materials are most commonly used for facing works on the facade:

• Siding : wood, vinyl, metal (the price of one panel is within 1400 rubles).

• Flat stone (prices for one panel from 250 rubles).

• Sandstone (120 rubles / m²).

• Brick (the average price for one brick is 20 rubles). In a square meter it holds about 30 bricks, considering the seams.

• Stone (marble, granite).

• Artificial stone (based on gypsum, synthetics).

• Thermopanels .

Characteristics of the Materials Used for Facade Finishing

Siding is done with using a special technology that makes it resistant to corrosion and rotting. The cost of exterior home decoration per square meter will not exceed 1,000 rubles. Among the advantages: low weight, which does not put pressure on the foundation, maintains quality for up to 50 years, is easy to clean.

Thermopanel retains warm air, is environmentally friendly and fireproof, as it does not ignite.

Among the advantages of stone: high strength, resistance to environmental influences. Ceramic plate is used most often. Among the disadvantages: high cost and strong pressure on the foundation.

Decorative plaster has a wide use. With it, you can hide small errors and irregularities. The base is gypsum or cement. Decorative plaster is at least 25 years. It is used to design the facade of the house. A very budget way to hide flaws.

Note! Regardless of the finishing method used, construction companies usually take it upon themselves to remove all rubbish. In some cases it is noted in the estimate.

What is meant by finishing

Finishing is the final stage of repair. Before proceeding to this stage, you need to review in detail and come up with a plan and room design. After the start, it will be impossible to return to the original version, so you should study the project very carefully.

This stage includes:

• Ceiling decoration - suspended or suspended ceiling, plastering, painting, use of panels.

• Installation of such materials as: laminate, linoleum, cork covering, tile, ceramic granite, parquet.

• Painting on window sills, window frames, doors and openings.

This can be interesting! In the article on the following link, read about how to choose the lining for interior decoration of the house - useful tips.

• Wallpapering , paneling, painting, and tile trimming.

• Installation of sockets and a switch.

• Lighting devices and their installation.

• Cleaning and removal of construction waste.

Monetary sums spent on basic work

House electrification will cost about 100 thousand rubles if the house has an area of ​​about 100 m². If there is a wooden structure, then saving on quality is very dangerous.

The price of finishing a private house inside can vary greatly depending on the size of the building. The cost of plumbing layout from 60 to 140 thousand for work. This does not include the cost of materials.

The ventilation system will cost 130 thousand if you use ready-made ventilation systems. The average cost per square meter of a country house ventilation system will cost 1.5 thousand rubles.

Draft includes plastering.If you count the square of the wall surfaces, then it turns out about 130 thousand, which would have been spent on work and the purchase of materials. Since now almost all panels are used from drywall, this money can be saved. Sheet drywall will cost 250-300 rubles.

Draft flooring costs about 450 rubles per 1 m². You can save on this point, as usually screed on the floors is not bad.

Details also affect the amount: someone is ready to buy inexpensive doors of an unknown brand, and someone will choose only doors from natural wood that cost more than 30 thousand rubles . Chandeliers, lamps, sockets and other parts can be selected cheaper and save a couple of tens of thousands of rubles.

The price of interior decoration of a country house also depends on the materials you want to use. Cottage, unlike an apartment, I want to make as close as possible to nature, so the materials are natural, preferably from wood. But a tree on the floor, such as parquet, will cost from 1.5 thousand to 4.5 thousand rubles per square meter.

The approximate cost of the work is given in the following table:

The ready-made frames of houses of both the first and second type are on the market. This is due to the fact that the construction of such buildings is faster and less expensive. The difference between them is small, but there is one major difference: panel houses do not require plastering. This saves time and about 200 thousand rubles.

In the video you can see the interior decoration of the house:

It might be interesting! In the article on the following link read about the original tree house .

Conclusion

Finishing a house under construction is a tangible item for the entire budget, so the choice of materials should be given due attention in order to get the best result in terms of quality and cost. Even at the stage of discussing the project at home, do not hesitate to ask the specialists as many questions as possible - this will help them to more fully understand your needs and optimize costs.