The technology of building frame objects with CIP panels, popular in Northern Europe and America, allows you to quickly construct residential buildings and spend only a few funds on their maintenance. With compliance with the technology of installation and finishing works in the future, you can significantly save on heating, because these houses keep heat well. As a result, in order to fully utilize all the advantages of CIP houses, all installation and finishing works must be trusted by professionals.
A SIR sandwich panel consists of two sheets of OSB with a layer of insulation between them. Products are distinguished by durability, durability, increased heat saving, simple installation. But despite the mass of positive properties, these panels are able to absorb water well, which means that they must be protected from moisture both from the outside and from the inside. Therefore, the first thing that is needed after the completion of construction is the complex decoration of the CIP house. The choice of material is carried out depending on natural factors, financial capabilities and your personal preferences.
Negative the influence of external factors: ultraviolet, strong wind, rain, reduces the service life of any building material. Frame houses with CIP panels without fail have exterior finish, which significantly extends their service life.
Exterior decoration can be done with any finishing material. The walls of the frame house are flat, straight, firmly hold fasteners.
Each material intended for exterior decoration of a house from CIP panels has its own characteristics.
Natural or artificial stone, as a rule , used for partial wall decoration: plinth, exterior corners, decorative inserts. The material has a low thermal conductivity, strength, durability, however, has a high cost.
Different types of natural stone are used for decoration: quartzite, granite, limestone, marble, travertine. The natural palette of their colors includes shades of brown, beige, gray, pink.
Stone tiles have significant weight - with a large area of such decoration increases the load on the frame and foundation. This must be taken into account when designing, and if such finishing is carried out for an already built house, then the framework and the foundation will probably have to be strengthened.
Fixing of stone tiles is performed on cement mortar. To seal the joints, apply silicone sealants. Some types of stone, for example, limestone, can pass and absorb moisture, so their surface should be periodically treated with moisture-proof compounds.
For tiles with a thickness of more than 10 mm and an area of more than 0.5 square meter. may require additional hardware.
Residential buildings with stone trim look solid and reliable. Visible damages from precipitation and sun do not appear on the tiles, so it will not be necessary to carry out cosmetic repairs to the stone base.
For buildings in the Russian style a block house is often chosen as an exterior finish, such material is considered a type of wooden wall paneling. The outer side of the products has the shape of a semicircle, the inner side is flat with airway slits. Such special holes increase the insulating ability of the material and reduce stress in the wood.
Rounded logs of hardwood are used to manufacture the block house. Products turn out strong, durable, eco-friendly. The most popular for exterior decoration of houses is a block house 200-600 cm long, 9-16 cm wide, 2-3.6 cm thick.
For the connection of elements, a thorn-groove fastener system is provided, which makes it possible to mount the block house quickly and easily. The basis for fixing the finish is a vertical lathing of the metal profile. Under the crate stack vapor barrier material, insulation, waterproof membrane. This layer allows for maximum protection of CIP panels from environmental exposure.
The block house can be used for a full exterior finish or combined with other materials. After finishing the house from SIP panels outside is finished, thanks to the block-house, the structure will look like a log house. The block house can be painted with colored varnishes, paints, covered with fire-bioprotective compounds.
Big plus combining these materials into that for applying the plaster wall CIP at home does not have to level. In addition, this material has many advantages:
; no complicated equipment is required for applying plaster;
external facades turn out to be beautiful, exclusive patterns can be applied;
plaster forms a durable coating, it does not deteriorate under the influence of external adverse factors.
For exterior work most often used is a mineral (cement) type of plaster, which has the highest strength and resistance to negative impacts.
Depending on the raw materials used, there are several types of plaster:
Finishing large areas requires a significant amount of material, and cement plaster is the most affordable. The facade treated with such material breathes. The disadvantages include a narrow color palette.
If you have financial opportunities, use silicate plaster, which has many colors, high strength, but is expensive.
Silicone, acrylic and polymeric plasters are plastic, easily tinted, but can fade. They are often used in interior decoration.
was used as a finishing material for the exterior walls of the house from CIP panels. The panels can be made in three ways:
A fiberglass matrix is mounted on the walls of the panels, which prevents the formation of cracks at the joints. Then the plaster is applied on the prepared surface.
In the northern regions where additional warming is required, the walls are sheathed outside with a heat insulator. The surface is reinforced with plastic reinforcing mesh and plaster.
The walls of the slabs are covered with a waterproofing film, and the sheathing is mounted. Cement particle boards are attached to the frame. The surface is plastered and painted if necessary.
Cement particle boards are made from wood waste using a cement binder. The material is environmentally friendly, durable, resistant to damage, has an affordable cost.
However, mounting such a material is difficult, the plates weigh a lot. In addition, the sheet bends when lifted on one side. In order to cut off from him the necessary pieces, you need a construction tool.
The large size of the plates allows you to finish in 1-2 days. The appearance of the facade will be attractive, it can be painted, plastered, decorated with stone.
use of ventilated facades. The basis of the design is mounted metal frame, which is fixed facing material. The presence of the air gap provides good sound insulation, heat preservation, optimal microclimate inside the building.
The advantages of ventilated facades include high installation speed, simple replacement of damaged elements and a wide choice of textures and colors. You can finish at any time of the year, regardless of air temperature, humidity.
OSB panels consist of wood shavings bonded with a mixture of resins with synthetic wax and boric acid. The material has an affordable cost, while the appearance of the plates is similar to natural wood. Products have less weight than DSP, so their installation is easier and without the involvement of specialized equipment.
Depending on the class of the product, it is used for outdoor or indoor use. The surface can be laminated or varnished. The grooved version has a groove-tongue fastener system. The disadvantages of the material include its low vapor permeability and a significant emission of formaldehyde vapors that make up the resins.
Exterior decoration of the house from CIP panels with plates occurs along guides. The presence of the fastening system in the plates speeds up the installation process, provides a strong connection of elements. The plates are easily cut, their surface can be painted with any composition, varnished, plastering.
This type of finishing material has an optimal ratio of price and quality. Siding is used for finishing modest country houses, as well as for the decoration of luxury cottages.A variety of colors and textures can satisfy a variety of requests.
For more information about siding and finishing the facade with this material, look at the video:
For the exterior trim most often used:
Vinyl siding. Differs in light weight, but quickly deteriorates from exposure to ultraviolet radiation and temperature changes.
Metal siding. The material has anti-corrosion treatment, which increases resistance to external factors. However, the metal is very hot in the sun and well holds extraneous sounds.
Plastic siding. Plates are quickly and simply mounted, but they have a high fire hazard, they burn out in the sun.
Siding panels are made long, so when installing them you must use a laser level. Otherwise, you can get the asymmetry of the corners.
On our website you can familiarize yourself with the most popular projects of houses from CIP-panels from construction companies represented at the exhibition of houses "Low-Rise Country".
To increase the thermal insulation of the facade between the CIP slabs and siding, an insulator layer is laid. Under the exterior trim also fixed insulated wires for electrical work.
The most environmentally friendly finishing material is considered the front the board. Unedged boards have the lowest cost, they are made of pine, birch, larch, differ in size. To preserve the strength of wood, its protection from pests and moisture requires regular treatment of the facade with impregnations.
Decorative boards for exterior decoration are called planken. Elements have a fastening system that provides quick installation and a smooth surface of the facade.
A special type of hardwood facade board that has been heat treated is called a thermal board. As a result of exposure to high temperatures, the material becomes absolutely resistant to temperature expansion and hygroscopic.
Wood-polymer composites are used for finishing work in a complex climate. The material contains a polymer, which gives it maximum strength, fire safety, resistance to high humidity and temperature extremes.
Clinker tiles are used to create the facade cladding that imitates brickwork. Products are made from natural components, differ in durability, frost resistance, wear resistance. The range of tiles includes products of different sizes with a smooth, grooved, rough, glazed surface.
The installation of the tiles is carried out on a special glue, the gaps are filled with grouting. From the right choice of glue will depend on the durability of the finish. The cost of ancillary materials, tiles and work on its laying is significant. But if you are ready to spend more, but at the same time get a spectacular and fashionable facade, then you should pay attention to the clinker tiles.
The budget option for finishing is the use of plywood, which is painted into the selected Colour. The material has a low cost, medium durability and strength. In the exterior it is recommended to use only moisture-resistant plywood sheets.
For interior and exterior trim options, see the video:
Exterior finish CIP of houses with painted plywood is relevant in European style when the surface of the material is painted with light paint and is decorated with wooden bars in a contrasting dark color. To insulate the facade, you can use glass wool or stone wool.
On our site you can find contacts of construction companies that offer the service of finishing and warming houses. Directly to communicate with representatives, you can visit the exhibition of houses "Low-rise Country".
The specificity of houses from CIP panels is such that interior decoration can be carried out immediately after construction is completed. Time for shrinkage is not required, while the surface of the walls and the corners are smooth.
With the help of plaster you can get a glossy wall surface or create an individual pattern. Popular Venetian plaster or bark beetle forms unique patterns that harmoniously fit into any style of the room.
Interior decoration CIP at home can be made of polymeric or acrylic compounds.They are easily tinted and applied, dry quickly and have no smell. The advantages of the material also include a good vapor permeability, moisture resistance, strength and durability.
Lining is a plastic strip with special locks on the end sides. It is easily fixed on the crate, when connected forms a flat surface. Most often the material is used for the decoration of the bathroom of residential buildings, corridor, kitchen, balcony.
The main advantages include:
the smooth surface of the plates is easily cleaned of dirt;
resistance to high humidity and temperature;
products are lightweight.
Installation of plastic wall paneling can be performed directly on the CIP panel without sheathing. This allows you to save on the purchase of materials and installation work.
Ceramic tile is most often used for finishing the floor, but it is suitable for walls. Installation is carried out on a special tile adhesive, the gaps between the tiles are sealed with grout. Ceramic tiles are available with a glossy, matte and patterned surface. The most popular is the square shape of the tiles, in the laying you can combine products of different shapes and sizes.
The advantages of ceramic tiles include the ability to withstand heavy loads, resistance to moisture and low temperatures. The cost of material and installation work is high, but the coating will last for many years.
It can be interesting! In the article on the following link read about exterior trim of the house of aerated concrete.
When fixing sheets of drywall on the CIP panel, the fire safety of the substrate is significantly increased. Indoors it will be better to keep warm, less extraneous sounds are heard. Drywall can be used for walls and ceilings. Installation is carried out in 3 ways.
Fixing drywall sheets directly to the CIP panel. Allowed thickness not more than 2 layers.
On a frame basis. Allows you to hide inside the communication, but significantly increases the thickness of the wall.
Fastening on wooden beams that are between the panels. It is the most universal way.
The material is made from natural components, which ensures the preservation of the ecological construction. On top of the drywall sheets, you can do any finishing.
Finishing a house with CIP panels inside can also be done in a “bare” way: the surface of the walls and ceiling is primed, after which it is painted or glued to the wallpaper. Pre-plastering and leveling is not required, but the seams must be sealed.
An overview of the interior decoration of the house from SIP panels, see the video:
Paint is chosen on a water or acrylic basis, the composition is tinted to obtain the desired shade. Paints are made with a glossy or matte finish. Light glossy walls visually increase the area inside.
If the CIP panels are coated with colored or transparent lacquer, the walls will look like made of natural wood. For pasting, you can choose wallpaper on non-woven or paper base. Pasting perform on primed walls.
Separate version CIP panels have factory facing. This may be lamination, fixing plasterboard or drywall. More expensive products are veneered with decorative plywood, grooved.
Additional layers are easily glued together with a layer of OSB, forming a single panel. To facilitate installation, side fasteners are provided that allow you not to drill additional holes in the plates.
It is possible to build a gypsum cardboard with the wall decoration suspended ceiling of this material. The design can be multi-layered, but it will have considerable weight and is difficult to assemble.
A simpler version of the ceiling decoration is the use of stretch ceilings. They consist of an aluminum or plastic frame on which the vinyl film is stretched.
The choice of shades is very wide, you can use several colors or patterns. Installation of the ceiling takes several hours. The vinyl film reliably protects the VULTURE of the panel from moisture, steam.
It might be interesting! In the article the following link read about front panels for exterior finish of the house.
It can be interesting! In the article at the following link read about inexpensive options for exterior cladding when finishing a wooden house.
It can be interesting! In the article on the following link read about fiber cement panels for facade decoration.
When choosing an option for the exterior and interior of the house from the vulture panels, it is necessary to study all the features of the use of materials, their advantages and disadvantages. Existing offers in the market of building materials allow to satisfy any desires. When ordering a finished project of a house from SIP panels, you will receive a house with a finish already chosen by designers. But if you wish, you can make some changes to any sample project.